ENGINEERING MATERIAL FOR COMPLICATED GEOMETRY
Ultrafuse® ABS Fusion+ characterized by increased temperature, chemical and mechanical resistance. Matt finish which significantly improves functionality and requires finishing. Good interact with water-soluble support filaments. The filament is based on an ABS grade which can be directly printed on glass without any adhesives or tape and has a higher success rate of prints due to extreme low warping.
APPLICATION: automotive parts, jigs and fixtures
| Extrusion Temperature: | 240-260 °C |
| Printing speed: | 40-80 mm/s |
Omni3D and FUSS sp. z o.o. used large-format ABS 3D printing to manufacture a full-scale structural component for the Silence Chair. This technical case study examines the slicing strategy, thermal management, warpage prevention, post-processing, and €662.85 production cost of the 69-hour build.
Achieving EN 45545-2 HL3 compliance in railway additive manufacturing requires more than selecting a flame-retardant filament. This article explains how certified materials, controlled industrial printing, 100% infill, compliant adhesives, and approved surface finishes work together to produce safe railway components.
Defense...
